Concrete quote referrals built around access, levels and scope.0482 392 415
RCRockhampton Concreting CoReferral serviceCall 0482 392 415
Home/Concrete Cost Guide Rockhampton

Rockhampton Region

Concrete Cost Guide Rockhampton

A price is meaningful only when compared scopes match.

What the job involves

Small pours, difficult access, demolition, pumping, weak ground, drainage changes and decorative finishes can make similar-looking areas cost differently.

Decisions that shape the scope

Preparation

Compare excavation, disposal, base and compaction.

Structure

Compare thickness, reinforcement, edge details and jointing.

Placement

Compare supply, pumping, labour, finishing and curing.

Completion

Compare saw cutting, sealing, clean-up, permits and exclusions.

Local planning point

What to check in this market

Driveway crossover permits and stormwater work should be visible in the quote. Do not treat an online range as a contractor offer.

Useful details for a quote request

Compare like with like

Ask each responding provider to put the proposed scope, assumptions, exclusions and responsibilities in writing. A lower figure is not a saving if it omits preparation, access, disposal, approvals or completion work that another quote includes.

Rockhampton’s existing crossover guide separates public access approval from the slab inside the boundary. Start the quantity enquiry with that distinction: draw the road-reserve work separately from the private driveway footprint. If the proposal includes table-drain access or a changed entrance, describe it explicitly so the provider can check the applicable drawing. The online volume result cannot choose a crossover design or price unmeasured drainage work. Check the local access scope.

Concrete quantity estimator

Enter your measurements or observations, then calculate. This is a planning aid; confirm the proposed work on site.

100 mm is a private light-vehicle example, not a design. Changing project clears thickness.

Method: area = length × width; volume = area × thickness/1000; allowance volume = volume × (1 + allowance/100). Default 8% allowance and rounding up to 0.1 m³ are assumptions, adjust to suit.

Example: 6 × 4 m at 100 mm, 8% = 24 m², 2.4 m³, 2.592 m³ with allowance; indicative order 2.6 m³. Ask a supplier about delivered concrete.

Cement Australia Concrete Mix: 110 × 20 kg bags/m³, shown only at ≤1.0 m³ (our rounding, adjust to suit). ARC: rough one-layer sheets = area/12.4, rounded up, 6 × 2.4 m sheets including standard laps; not reinforcement design. CCAA minima: foot traffic 75 mm; vehicles under 3 tonnes 100 mm; 3–10 tonnes 150 mm. Not slab/crossing specifications.

National supplied-and-laid finishAUD/m²
Plain$65–$85
Coloured$75–$95
Exposed aggregate$100–$150

hipages, updated 6 January 2026; sources checked 14 October 2026. Benchmark = area × chosen range. National comparison only; get an on-site quote.

One clear enquiry

Request a concreting quote

Describe the property and scope once. Your details can then be referred to a relevant provider servicing Rockhampton Region.

We are a referral service, not the trade contractor. Submission does not create a contract or obligation to proceed. See our Privacy Policy and Terms.
CallRequest a quote